Water Softener, Large
For more than four people or well water: a 12" x 52" resin tank with 2.0 cubic feet of resin, plus a separate brine tank.
For homes with more than four people, or on well water. The Canature Hydrotech 765-200 is a two-tank softener: a 12 by 52 inch resin tank holding 2.0 cubic feet of resin, and a separate brine tank that holds up to 350 lb of salt. It delivers 13 gpm and regenerates on metered use at a set time. It needs 30 to 125 psi of water pressure, which a gravity-fed tinaco alone does not reach.
Features
What you get
- Two tanks: 12" x 52" resin tank plus a separate brine tank
- 2.0 cubic feet of resin: 44,000 grains at the factory setting (53,000 at 12 lb salt)
- 13 gpm service flow
- Brine tank holds up to 350 lb of salt
- Meter-delayed regeneration as standard
- IAPMO certified to NSF/ANSI 44 and 372; 5-year valve, 10-year tank warranty
System Specifications
Specs
- Model
- Canature Hydrotech HT765-200 (item 15100654)
- Design
- Two tanks: resin tank plus separate brine tank
- Resin tank
- 12" x 52", 2.0 cu ft of 8% cation exchange resin
- Capacity
- 44,000 grains at the factory setting; 53,000 grains at 12 lb salt per cubic foot
- Service flow
- 13 gpm at a 15 psi pressure drop
- Brine tank
- 20.3" x 37.4", holds up to 350 lb of salt
- Water pressure
- 30 to 125 psi (a gravity-fed tinaco alone does not reach this)
- Water temperature
- 40 to 110 °F
- Electrical
- 120V, 60 Hz
- Regeneration
- Meter delayed (standard)
- Efficiency
- Uses up to 50% less salt and 28% less water
- Certification
- IAPMO R&T certified to NSF/ANSI 44 and 372
- Warranty
- 5-year control valve; 10-year pressure tank
- Sized for
- Homes of 5 or more people, or on well water
How It Works
Soften, regenerate, refill salt
- 1
Softening
Water flows down through 2.0 cubic feet of 8% cation exchange resin in the 12 by 52 inch tank, which removes the calcium and magnesium that cause scale. At the factory setting it handles 44,000 grains between regenerations, at 13 gpm.
- 2
Metered, delayed regeneration
The control valve meters the water you use and regenerates at a set time once the resin needs it, rather than on a fixed calendar. Canature rates it at up to 50% less salt and 28% less water.
- 3
A separate brine tank
Salt goes in its own brine tank, up to 350 lb, with a safety float, an air check and a molded brine grid that reduces salt bridging. It needs a drain nearby, floor space for both tanks, and 30 to 125 psi of water pressure. Salt is an ongoing cost.
What's Included
Everything you need for clean water
Softener
Canature Hydrotech 765-200 resin tank, control valve and brine tank
Fittings
Pre-installed bypass with quick connect fittings, 3/4" 90° elbows and a 10 ft drain line
Installation
Professional installation is quoted separately
Free water test
Comprehensive in-home water quality test
Satisfaction guarantee
30-day satisfaction guarantee
Why This System?
Choose the Large for more than four people, or for well water. Two cubic feet of resin and a 350 lb brine tank give it the capacity a busy house or a well needs, and it is IAPMO certified to NSF/ANSI 44 and 372. It needs 30 to 125 psi: if the house runs only on a gravity-fed tinaco, we will talk about pressure on the visit.
Every system includes a 30-day satisfaction guarantee and is eligible for our BWS Care plans: a yearly inspection of the salt, the brine tank, the resin and the settings.
Comparing options? See all Water Softeners systems side by side.
Compare Water SoftenersMaintenance
How Often Should My Softener Be Serviced?
A softener does not use replaceable filter cartridges, but it does need regular attention. We recommend a full inspection once a year: salt level, brine tank, resin condition, hardness test, and a programming check. Total Home Care includes your annual softener inspection alongside your whole-house and RO maintenance, so every water system in your home is covered under one plan.
Explore Care PlansWant this system installed?
Tell us about your home and we'll send a quote within 24 hours.